Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.

Conventional Cooling Air System
Model 2100

System Features
  • Speed control integrated into dynamometer operation
  • ProLink™ provides direct control of speed in test program
  • Negative pressure maintained in test chamber

The Model 2100 Conventional Cooling Air System provides controlled air flow over the brake to expedite thermal dissipation. The cooling system utilizes a variable speed AC drive and control is integrated within the ProLink dynamometer software.

The brake enclosure is maintained at a negative pressure to prevent brake dust from escaping into the test lab. The cooling air system is mounted on a platform and typically located on the building rooftop or outside on ground adjacent to dynamometer.

Ductwork from the cooling platform to the brake enclosure is included in the installation scope of work.


Conventional Cooling Air System
Model 2100

Typical Specifications
Variable Air Speed 0 -56 kph (0-35 mph)
Flow Rate 4080 m³/hr (2400 cfm)
Square Duct Size 355mm (14”) or 457mm (18”)
Control Modes 0 to 100% fresh air or recycled air mixture
Temperature Control Ambient
Humidity Control Ambient
Measurement Sensors Air speed, temperature, humidity
Approximate Weight 1000 kg (2200 lbs)
Approximate Size 3200mm (126”) x 1830mm (72”)

Options
  • Different flow rates and velocities
  • Push-Pull type sytems where there are specialized requirements
  • Addition of environmental controls

For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.