Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.

Booster Test Stand
Model 2552

System Features
  • Stainless steel bench
  • T-Slot Base for fixture setup
  • Generic tooling allows a wide array of test procedures
  • Actuator for force or stroke applications during testing
  • LINK Brake Apply System
  • Panel mounted gauges for high visibility
  • Panel mounted supply connections
  • ProLink software

The Model 2552 Booster Test Stand is specifically configured for system evacuation, fill and displacement evaluations. These tests are performed by applying pressure to the brake booster, simulating service conditions and measuring movement of the brake system.

The LINK family of Brake Component Test Stands are versatile test systems that can be configured for performance and durability testing of automotive brake components. The test benches are constructed from stainless steel with a nickel-plated T-Slot base. A variety of test parts and apply mechanisms can be mounted on the bench top to simulate real-life installations.

The ProLink software package is a key part of this test stand. ProLink integrates control, data acquisition, analysis, and reporting. The end result is a user friendly interface with a wide array of options for data analysis and reporting.


Booster Test Stand
Model 2552

Typical Specifications
Maximum Flow Volume    98 cc
Flow Resolution    0.01 cc
Minimum Flow    0.2 cc / sec
Maximum Flow    160 cc / sec
Maximum Pressure    200 Bar
Pressure Resolution    0.7 Bar
Maximum Stroke    25 mm
Stroke Resolution    0.05 mm
Stroke Speed    0.1-220 mm / sec
Maximum Force    1000 N
Force Ramp Rate    5-500 N / sec
Data Channels    64
Sample Rate (per channel)    1000 Hz

Options
  • Anechoic chamber for actuation noise measurement
  • Linear motor for brake actuation
  • Simulation of multiple vehicle brake systems
  • Custom fixturing

For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.