Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.

Portable Brake Evaluation System
Model 3378

System Features
  • ProLink™ Software
  • Automatic Report Generation
  • 2 Non-contact probes
  • 0-5 RPM Operation
  • Adjustable to 3, 4, or 5 lug patterns
  • Vertical Beam Laser Alignment
  • Compact, Portable Design
  • Durable Travel Case with Integral Wheels and Telescopic Handle

The LINK Model 3378 Portable Brake Evaluation System provides the ability to measure on-vehicle, rotor inboard and outboard run-out, disc thickness variation (DTV), and rolling and break-away torque.


The unit comes with two capacitive probes and has a four probe option. The drive motor is adjustable vertically. ProLink™ software provides straightforward operation of the system. It also handles data collection, post processing and automatic report generation.

For travel, the components of the Model 3378 can be disassembled and stored securely in the durable case. The motor head, wheel drive adapter, alignment laser, and motor head riser store easily inside the case, alongside the built-in signal conditioning rack and power supply. The case has wheels and a telescoping handle to make the unit easily transportable whether by vehicle or aircraft.


Portable Brake Evaluation System
Model 3378

Typical Specifications
Motor Speed 0 - 5 RPM continuous
Drive Motor Torque 0 - 85 Nm (0 - 62.7 lb-ft ) continuous
Probe Range / Accuracy 2.54 mm (0.10”) / 0.25%
Operating Temperature 0° to 30°C (32°F to 86°F)
Probe Type 2 capacitive, non-contact w/ 90° quick disconnect cable (4-probe option)
Wheel Drive Adapter Adjustable to fit 3, 4 or 5 lug patterns
Wheel Position Encoder 1024 ppr
Alignment Laser Vertical Line Beam
Head Height Range 430-760 mm (17 - 30 in) ground to center of test head output shaft
Weight 423 N (95 lb)
Dimensions 66W x 38D x 47H cm (26 W x 15D x 18.5H in)

Options
  • Additional capacitance measurement channels up to 4
  • Custom fixtures for unique wheels

For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.