Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Transmission Torque Cycling Durability Machine Model 2090
System Features |
- ProLink™ software package
- Accommodates customers complete line of transaxles and transmissions
- Multi-port hydraulic management allows simultaneous gear interaction
- Multiple strain gage, accelerometer and microphone channels to evaluate NVH and system dynamics
|
The Model 2090 Transmission Torque Cycling Durability Machine is used to determine case and component fatigue for automatic transmissions. This allows determination of the effects of individual component variability with respect to temperature, torque, operating pressure and part lubrication. Tests are conducted by cycling each gear range at pre-selected pressures and input/output torque levels.
This machine is designed to be a low speed high input/output (absorption) torque transmission tester. The transmission is connected to a drive motor that simulates engine input to an absorption motor that simulates the drive train load. The process employs vehicle-specified drive train lubricants as the cooling medium. Apply pressures are modulated to obtain controlled outputs in repetitive tests. Transmission failure conditions can be duplicated or predicted in the lab.
Machine controls and data acquisition are managed by the ProLink software package. Typical output parameters are: pressure applies, oil flow, oil level, temperatures, input/output torque and input/output shaft rotation.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
