Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.

Automatic Transmission High Speed Test System Model 2190

System Features
  • Environmentally controlled chamber
  • Pitching the transmission from –31° to +38°
  • Roll capability of ± 7°
  • 10,000 RPM
  • Accommodates both transaxles and rear wheel drive transmissions

The Model 2190 High Speed Motoring machine is designed for both durability and performance testing of complete transmission assemblies. It is designed to accommodate the customer’s complete line of transaxles and transmissions. Parasitic losses are evaluated for both front wheel drive and rear wheel drive type transmissions.

The entire transmission is housed in an environmentally controlled chamber that allows the simulation of worldwide operational conditions. For rear wheel drive transmissions an axial load may be applied to demonstrate the transmission thrust capabilities. Transmission pump efficiency and durability are also measured.

To evaluate effectiveness of the lubrication system, the transmission under test is mounted on a multi-axis platform and rolled to simulate actual road environments. This unit permits pitching the transmission from –31° to +38° and a roll capability of ± 7°.


Automatic Transmission High Speed Test System Model 2190

Typical Specifications
Operating Speed 10, 000 rpm continuous (both inputs and outputs)
Converter Thrust Load 2,000 lbs @ 8,000 rpm
3,000 lbs @ 3,000 rpm
Input Torque 2,000 in-lbs
Output Torque 5,000 in-lbs
Converter Temperature -40° F to 300° F
Grade Tilt 0% to 60%:  0° to +38° uphill / -31° downhill
Transmission Roll 0° to 7°
System Pressure 0 to 300 psi
Oil Flow 0.1 to 25 gpm


For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.