Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Double End Stator Lacing Machine
Model 941/942
System Features |
- Knot Preparation
- Recirculating oil lubrication
- Variable speed drive motor
- Rugged gearbox
- Pneumatic brake
- Cam-driven motion control
- Upper needle casting counterbalance
- Hot wire cord cutting
- PLC or Link Sequence Controller
- Electric Eye cycle interrupt
- Inch screws & fasteners: 941
- Metric screws & fasteners: 942
- High-mount electronic cord tension
- Lacer mounted operator controls
|
The Models 941 and 942 simultaneously lace both ends of fractional and small integral horsepower electric motor stators. The 941 and 942 incorporate the heavy-duty construction and quality workmanship that have made this the industry standard for over 20 years.
An air brake is coupled with the horizontally mounted AC motor and gear reducer to provide smooth, quiet operation. Automatic cord tension control is achieved by programming the Electronic Tension Heads. The Stepper Motor Index system, with Tooling Plate Position Sensor, allows rapid changing of stitch patterns, without tools. This Lacer offers the diamond stitch pattern for tight lacing, maximum wire coverage and bore clearance.
The controls enable a variety of multiple stitch lacing patterns with lacing speeds up to 130 stitches per minute. The Lacer may be programmed to slow down at specific spots for the operator to manually position the leads. Knots are automatically formed at the end of the lacing cycle.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
