Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Single End Stator Lacing Machine
Model 975
System Features |
- Grease lubrication system
- Adjustable speed DC motor and gearbox
- Rugged gear and cam driven motion control
- Microprocessor based Sequence Controller
- Digital cam resolver
- Infra red electric eye
- Automatic cord tension control
- Quick change arbor spindle
|
TheModel 975 separately laces each end of medium-sized electric motor stators. An adjustable speed motor and gear reducer drives a rugged camshaft to perform the critical needle and cord guide motions.
Standard features include the microprocessor-based Sequence Controller and resolver which allow programming a variety of multiple-stitch lacing patterns with accurate control of speeds up to 125 stitches per minute. The sequence controller and an electronic tension head provide programmable cord tension.
An optional arbor design simplifies the changeover for different stator ID’s. This design reduces changeover time and also may lower tooling costs. The complete range of stator ID’s from 5.5” (140mm) to 9” (229mm) can be covered with one arbor and seven sets of shoes. This new arbor can expand up to ½” (13mm) so a single set of shoes accommodates any ID stator in its range. Stators from 5.50” (140mm) to 6”(152mm) ID can be laced on a single set of shoes.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
