Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Page Footer
Print Header

EL1 Spring Tester for Compression/Tension Testing - Loads up to 11 Kg (25 lb)

System Features
  • Robust construction for long service life
  • Capture loads at up to 8 preset heights
  • Capture heights at up to 8 preset loads
  • Auto spring rate computation
  • Spring classification
  • Metric to English conversion
  • Win3700 Software

The LINK Model EL1 is a precision instrument, designed to provide extremely accurate test capabilities for low load springs while providing an overload safety to protect delicate transducers. Platens are ground parallel within 0.0005 inches and ball bushing guides eliminate side force on the Load Cell to provide accurate data..

The EL1 comes standard with the Model 3700 Display Module which allows “Pass-Thru” production testing, automatic spring rate calculation, and classification of springs. An optional printer is available.

Loading LINK’s Win3700 software onto a tablet computer, laptop, or PC allows the operator to enter and store test parameters, view test results and see a real time load curve. Data may be stored in text format and exported for further analysis to third party spreadsheet or SPC software by using a user written macro.


EL1 Spring Tester for Compression/Tension Testing - Loads up to 11 Kg (25 lb)

Typical Specifications
Load Cells
(1 standard)		 2.25 kg (5 lb)
4.5. kg (10 lb)
9 kg (20 lb)
11.25 kg (25 lb)
Daylight Opening 304 mm (4 inches)
Platen Diameter 125 mm OD (2 inches)
Load Accuracy 0.25 % Full Scale
Height Resolution 0.05 mm (0.0002 inches)
Power Requirement 95-250 VAC, 47-63 Hz
(for Display Module)

Options
  • Squareness Under Load Testing
  • Extended Daylight to 305 mm (12 inches)
  • Tension Hooks
  • Custom Platens
  • Custom Fixtures
  • Worm Gear Drive
  • Printer
  • Tablet Computer, Laptop, or PC

For more information on this product and how it can be configured to meet your requirements contact LINK at +1 (734) 453-0800 or sales@linkeng.com
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.