Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
TP Series Motorized Spring Tester
For Compression and Tension Testing
System Features |
- Heavy Duty Two Post Construction
- Snap on Guards for Easy Access
- Safety Interlock Doors
- Manual and Automatic Controls
- Capture Load at 8 Preset Heights
- Capture Height at 8 Preset Loads
- Auto Spring Rate Computation
- Spring Classification
- Metric to English Conversion
- Win3700 Software
|
The TP Series Spring Tester is designed with heavy-duty, twin-post construction. The ram travels at operator controlled variable speed on precision guide rods, driven by ball screws under stepper motor control.
The tester provides electronic compensation for load cell deflection and machine deformation, with precise height measurement throughout ram travel.
The Model 3700 Module displays height and load, as well as provides tester control. It also incorporates “Pass-Thru” production testing, automatic spring rate calculation, and classification of springs and can be switched between English and metric units.
Loading LINK’s Win3700 software onto a computer allows the operator to enter and store test parameters, view test results and see a real time load curve. Data may be stored in text format and exported for further analysis to third party spreadsheet or SPC software by using a user written macro.
Information presented in this brochure is for informational purposes only. Link Engineering Company reserves the right to make changes, alterations and substitutions to the machines, components or other information presented in this brochure without prior notice. For the latest information contact Link Engineering Company. Equipment pictured in this brochure may be shown with safety equipment removed or disabled for purposes of illustration. Equipment must never be operated with safety equipment removed or disabled.
