News & Events

Tim Duncan Honored with the SAE Outstanding Achievement Award

Jul 1, 2014

SAE International announces that Tim Duncan, Executive Vice President, Link Engineering Company, has been honored with the 2013 SAE Technical Standards board Outstanding Achievement Award.

WARRENDALE, Pa. (April 28, 2014) – SAE International announces that Tim Duncan, Executive Vice President, Link Engineering Company, has been honored with the 2013 SAE Technical Standards board Outstanding Achievement Award.

Established in 1953, the Technical Standards Board Outstanding Achievement Award recognizes individuals for outstanding service in the technical committee activities of SAE International. This includes valuable contributions to the work of SAE International technical committees, unusual leadership in the activities of an SAE International technical committee, significant contributions as a representative of SAE International to the accomplishments of technical committees of other organizations or of government agencies, and outstanding contributions to SAE International technical committee work in the form of research, test methods and procedures, and/or development of standards.

Mr. Duncan is the Executive Vice President of Link Engineering Company. At Link, he oversees testing facilities globally, with a focus on component-level testing both in laboratories and on full vehicles (on-road and on-track). He also oversees the Business Development and Sales of Link designed and manufactured test systems. His career began in 1980 with Lucas Girling, where he gained valuable experience in automotive and commercial vehicle brake testing. He remained at Lucas until 1994 when he joined Link Engineering.

Mr. Duncan is active in various brake and friction material committees and related subcommittees, including: Executive Director of Brake Standards Association; Chairman of the SAE Brake Dynamometer Standards Committee; Member of the Brake Manufacturers Council (BMC); Vice Chairman of the SAE Recommended Practice 628 Aftermarket Brake Lining Qualifications; Chairman of Friction Material Technical Committee & Brake Performance Committee Friction Material Standards Institute (FMSI); Board Member of Link European Automotive Technology (LEAT); and Chairman of A Door to Hope Haiti Christian Mission non-profit organization.

As an SAE Taskforce Chairman, Mr. Duncan was very instrumental in the initial development of the SAE J2521 Noise Squeal Matrix Dynamometer Test. He has chaired many SAE Taskforces, presented during several annual SAE Brake Colloquiums and annual Brake Manufacturers Council meetings.

SAE International is a global association committed to being the ultimate knowledge source for the engineering profession. By uniting over 145,000 engineers and technical experts, we drive knowledge and expertise across a broad spectrum of industries. We act on two priorities: encouraging a lifetime of learning for mobility engineering professionals and setting the standards for industry engineering. We strive for a better world through the work of our philanthropic SAE Foundation, including programs like A World in Motion® and the Collegiate Design Series™.

– www.sae.org –

You are now leaving Link Engineering

Link Engineering provides links to web sites of other organizations in order to provide visitors with certain information. A link does not constitute an endorsement of content, viewpoint, policies, products or services of that web site. Once you link to another web site not maintained by Link Engineering, you are subject to the terms and conditions of that web site, including but not limited to its privacy policy.

You will be redirected to

Click the link above to continue or CANCEL

Brakes

Type of TestTest HighlightsEquipment UsedExample Procedures
Chemical TestingMeasurement of copper, asbestos and other elements in brake friction materialsICP-OES / PLMJ2975
Materials TestingPhysical properties including quality control for friction, wear, compressive strain, shear strength, corrosion resistance, swell and growthChase Machine / Compressibility Machine/ Shear Machine / Corrosion Chamber / Environmental Chamber / OvenJ661, ISO 6310, ISO 6311, ISO 6312, ABNT NBR 9301, ABNT NBR 5505, ABNT NBR 5537, ASTM B117
Frequency ResponseComponent Frequency ResponseLaser Vibrometer Test StandSAE J2933, J3001, J2598, L-4375
Structural Fatigue and
Durability
Breaking strength, cyclic fatigueServo Hydraulics, Torque FlexJ2995, C419, C441, GMW18022
Caliper FingerprintingCaliper characteristics such as knockback, rollback, fluid displacement, deflection...Caliper Test Bench / Brake DynamometerL-4177, PF.90257
Brake Drag and DTVResidual drag, disc thickness variation, brake feel and vehicle fuel mileageOff Brake Drag Stand / Brake DynamometerJ2923, GMW14926, GMW14351, PF.90257, L-13080
PerformanceHydraulic, air and electric brakes, friction levels, stopping distance, corrosion, cleanability, brake torque variation, rotor cracking, regulation, stability control, coastdownBrake Dynamometer, Model 4000 DASJ2784, J2928 IS026867, GMW14985, PF.90210, PF.90244, L-405, FMVSS 121, FMVSS 122, FMVSS 105, FMVSS 135, FMVSS 126, FMVSS 136, ECE R13H, AMS
WearRotor wear, drum wear, lining wear, DTV, durability, city traffic, suburban trafficBrake Dynamometer, Model 4000 DASJ2707, USCT, L-423, PF.90244, Los Angeles, Detroit, Phoenix, Birmingham, Marquette
NVHBrake squeal during drag and decel events at different temperatures, pressure and torque levelsNVH Brake DynamometerJ2521, L420, 1430, GMW17427, PF. 90244
Brake EmissionsBrake dust particle size, count, concentration and massBrake DynamometerWLTP, CARB, Duty cycle

Hubs/Bearings

Type of TestTest HighlightsEquipment UsedExample Procedures
Wheel BearingWater intrusion and durability when exposed to mud and saltBearing Test StandLINK Hub and Bearing, GMW16306, GMW16310
Passenger car, sport/performance and open bed vehicle wheel bearing spallingBearing Test StandGMW16311, GMW16308, GMW16309
Brinelling resistance validates long-term reliability/durabilityBearing Test StandGMW16305
Rotary fatigue lifeRotary Fatigue MachineGMW16325
Wheel HubRotary bending fatigue life characteristicsRotary Fatigue MachineGMW14249
Hub/BearingEvaluate hub and bearing performance, durability, seals and NVH when exposed to extreme environmental effects such as temperature and mud/salt solutionBearing Test Stand/Rotary FatigueTIP-000037A, LINK Hub and Bearing, SAE J1095, LINK Impact
Hub FatigueHub fatigue using biaxial loadingBiaxial Test StandSAE J2562

Wheels

Type of TestTest HighlightsEquipment UsedExample Procedures
ChemicalEvaluates filiform corrosion on painted aluminum wheels and painted aluminum trimICP-OESASTM E3061
Wheel Corrosion and CoatingsEvaluates filiform corrosion, tape adhesion, degree of rusting on painted aluminum wheels and painted aluminum trimCorrosion ChamberSAE J2635, ASTM B368, ISO 9227,
ISO 2409, ASTM D3599,
ABNT NBR 11003, ASTM D610,
ASTM D1654
Wheel FatigueLoad simulation test of aluminum alloy wheelsBiaxialBMW QV36026, SAE J2562, FORD
L-307, GMW14340
Dynamic Cornering Fatigue and Dynamic Radial Fatigue - Steel wheelsEccentric Mass and RadialABNT NBR 6750
Rotational fatigue, Radial load fatigue and biaxial load fatigue of steel and aluminum wheelsEccentric Mass, Radial and BiaxialABNT NBR 6751
Dynamic Cornering Fatigue and Dynamic Radial Fatigue and Impact resistance of temporary use and normal highway use aluminum wheelsEccentric Mass, Radial and Drop TestABNT NBR 6752
Wheel Radial FatigueRadialGMW14909
Wheel ImpactWheel Inboard Rim Flange Vertical ImpactDrop TestGMW15321
Wheel radial impactDrop TestCETP 04.04-L300
Wheel Lateral ImpactDrop TestGMW14910, SAE J175
Wheel StiffnessFrequency Response Function (FRF)Frequency ResponseGMW14876
Deformation of the wheelServo HydraulicsJ2315
Center cap heat
resistance
Center Cap deformation under elevated temperature conditionsBench TestBrake Heat Center Cap

Tires

Type of TestTest HighlightsEquipment UsedExample Procedures
Parking ForcesAllows proper sizing of power steering componentsForce and MotionLINK Parking Forces
Tire FootprintDetermines the contact patch geometryForce and MotionTire Footprint
Tire Modeling
Determine tire inertia which is then used Ftire and other models and simulationsInertia MachineLINK Tire Inertial Properties
On-center parking effort test for Ftire inputForce and MotionSWP
Determine static stiffness (X, Y, Z, Alpha) for Ftire inputStatic Stiffness MachineSAE Static Stiffness
Determine how the tire envelopes an obstacleCleat MachineJ2731
Measure the forces and moments generated at a high frequency response spindle when the tire impacts a cleatCleat MachineJ2730
Braking and Cornering PerformanceDetermine the straight line braking performance of a tireForce and MotionJ2673
Determine the free rolling cornering properties of a tireForce and MotionSAE TIME, J1987, SWP
Measure the combined cornering and braking performance of a tireForce and MotionJ2675
Tire StiffnessMeasure rolling vertical stiffness of a tire at speedRolling Vertical Stiffness
Rolling ResistanceMeasure tire rolling resistance using a drumForce and Motion, Rolling ResistanceJ1269, J2452
Tire WearAssess tire wear in the labForce and MotionLINK Wear Test
Tire NVHTest tire sizzle, cornering noise, pass-by noise, steering wheel dither, freeze crack impacts, high speed uniformity and imbalance sensitivityForce and Motion, Dynamometer, Model 4000 DASNoise, Vibration, Harshness